dmesg - Ryzen 5 2400g
Linux version 4.15.0-10-generic (buildd@lgw01-amd64-036) (gcc version 7.3.0 (Ubuntu 7.3.0-3ubuntu1)) #11-Ubuntu SMP Tue Feb 13 18:23:35 UTC 2018 (Ubuntu 4.15.0-10.11-generic 4.15.3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
BIOS-e820: [mem 0x000000000400a000-0x0000000009cfffff] usable
BIOS-e820: [mem 0x0000000009d00000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000affffff] usable
BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
BIOS-e820: [mem 0x000000000b020000-0x000000009a9aafff] usable
BIOS-e820: [mem 0x000000009a9ab000-0x000000009be83fff] reserved
BIOS-e820: [mem 0x000000009be84000-0x000000009bf75fff] usable
BIOS-e820: [mem 0x000000009bf76000-0x000000009c341fff] ACPI NVS
BIOS-e820: [mem 0x000000009c342000-0x000000009cfeefff] reserved
BIOS-e820: [mem 0x000000009cfef000-0x000000009d081fff] type 20
BIOS-e820: [mem 0x000000009d082000-0x000000009effffff] usable
BIOS-e820: [mem 0x000000009f000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fd800000-0x00000000fdffffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000081f33ffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.60 by American Megatrends
efi: ACPI 2.0=0x9bf76000 ACPI=0x9bf76000 SMBIOS=0xf05e0 SMBIOS 3.0=0xf0600 ESRT=0x99a4c418 MEMATTR=0x988d4018
secureboot: Secure boot could not be determined (mode 0)
random: fast init done
SMBIOS 3.0.0 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./AB350 Gaming-ITX/ac, BIOS L4.43 02/12/2018
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x81f340 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000820000000 aka 33280M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x9f000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x0000000099a4c418 to 0x0000000099a4c450.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ (ptrval)] 96000 size 24576
Using GB pages for direct mapping
BRK [0x5d933e000, 0x5d933efff] PGTABLE
BRK [0x5d933f000, 0x5d933ffff] PGTABLE
BRK [0x5d9340000, 0x5d9340fff] PGTABLE
BRK [0x5d9341000, 0x5d9341fff] PGTABLE
BRK [0x5d9342000, 0x5d9342fff] PGTABLE
BRK [0x5d9343000, 0x5d9343fff] PGTABLE
BRK [0x5d9344000, 0x5d9344fff] PGTABLE
BRK [0x5d9345000, 0x5d9345fff] PGTABLE
BRK [0x5d9346000, 0x5d9346fff] PGTABLE
BRK [0x5d9347000, 0x5d9347fff] PGTABLE
BRK [0x5d9348000, 0x5d9348fff] PGTABLE
BRK [0x5d9349000, 0x5d9349fff] PGTABLE
RAMDISK: [mem 0x319fb000-0x34cf4fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000009BF76000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000009BF760A0 0000C4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000009BF7C900 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170831/tbfadt-658)
ACPI: DSDT 0x000000009BF76200 0066FB (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x000000009C32BE00 000040
ACPI: APIC 0x000000009BF7CA18 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000009BF7CAF8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000009BF7CB40 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x000000009BF7CBE0 005367 (v02 AMD AmdTable 00000002 MSFT 02000002)
ACPI: SSDT 0x000000009BF81F48 00119C (v01 AMD AMD CPU 00000001 AMD 00000001)
ACPI: CRAT 0x000000009BF830E8 000810 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 0x000000009BF838F8 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: SSDT 0x000000009BF83928 002CCA (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 0x000000009BF865F8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: AAFT 0x000000009BF86638 000200 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: HPET 0x000000009BF86838 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: UEFI 0x000000009BF86870 000042 (v01 00000000 00000000)
ACPI: BGRT 0x000000009BF868B8 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: IVRS 0x000000009BF868F0 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
ACPI: SSDT 0x000000009BF869C0 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
ACPI: SSDT 0x000000009BF86AB8 000E96 (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: SSDT 0x000000009BF87950 000850 (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: SSDT 0x000000009BF881A0 001A41 (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: WSMT 0x000000009BF89BE8 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000081f33ffff]
NODE_DATA(0) allocated [mem 0x81f315000-0x81f33ffff]
tsc: Fast TSC calibration failed
tsc: Using PIT calibration value
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000081f33ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000003ffffff]
node 0: [mem 0x000000000400a000-0x0000000009cfffff]
node 0: [mem 0x000000000a000000-0x000000000affffff]
node 0: [mem 0x000000000b020000-0x000000009a9aafff]
node 0: [mem 0x000000009be84000-0x000000009bf75fff]
node 0: [mem 0x000000009d082000-0x000000009effffff]
node 0: [mem 0x0000000100000000-0x000000081f33ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000081f33ffff]
On node 0 totalpages: 8108496
DMA zone: 64 pages used for memmap
DMA zone: 28 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 9948 pages used for memmap
DMA32 zone: 636657 pages, LIFO batch:31
Normal zone: 116685 pages used for memmap
Normal zone: 7467840 pages, LIFO batch:31
Reserved but unavailable: 97 pages
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 16 CPUs, 8 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x04000000-0x04009fff]
PM: Registered nosave memory: [mem 0x09d00000-0x09ffffff]
PM: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
PM: Registered nosave memory: [mem 0x9a9ab000-0x9be83fff]
PM: Registered nosave memory: [mem 0x9bf76000-0x9c341fff]
PM: Registered nosave memory: [mem 0x9c342000-0x9cfeefff]
PM: Registered nosave memory: [mem 0x9cfef000-0x9d081fff]
PM: Registered nosave memory: [mem 0x9f000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfd7fffff]
PM: Registered nosave memory: [mem 0xfd800000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists, mobility grouping on. Total pages: 7981771
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 31727596K/32433984K available (12300K kernel code, 2470K rwdata, 4220K rodata, 2404K init, 2416K bss, 706388K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 39134 entries in 153 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16
vt handoff: transparent VT on vt#1
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20170831
ACPI Error: [SMIC] Namespace lookup failure, AE_ALREADY_EXISTS (20170831/dswload-378)
ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20170831/psobject-252)
ACPI Exception: AE_ALREADY_EXISTS, (SSDT: AMD PT) while loading table (20170831/tbxfload-228)
ACPI Error: 1 table load failures, 7 successful (20170831/tbxfload-246)
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 3593.419 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7186.83 BogoMIPS (lpj=14373676)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 23 MCE banks
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Enabling Indirect Branch Prediction Barrier
Freeing SMP alternatives memory: 36K
smpboot: CPU0: AMD Ryzen 5 2400G with Radeon Vega Graphics (family: 0x17, model: 0x11, stepping: 0x0)
Performance Events: Fam17h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 8 processors activated (57494.70 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (40960 bytes)
PM: Registering ACPI NVS region [mem 0x9bf76000-0x9c341fff] (3981312 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 11:43:34, date: 02/24/18
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1519472613.080:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI Error: [PTOS] Namespace lookup failure, AE_NOT_FOUND (20170831/psargs-364)
No Local Variables are initialized for Method ["\" ]
No Arguments are initialized for method ["\" ]
ACPI Error: Method parse/execution failed \, AE_NOT_FOUND (20170831/psparse-550)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: Power Resource [P0ST] (on)
ACPI: Power Resource [P3ST] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000
pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400
pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
pci 0000:00:01.6: [1022:15d3] type 01 class 0x060400
pci 0000:00:01.6: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:15db] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400
pci 0000:00:08.2: enabling Extended Tags
pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000
pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000
pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000
pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000
pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000
pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000
pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000
pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000
pci 0000:15:00.0: [1022:43bb] type 00 class 0x0c0330
pci 0000:15:00.0: reg 0x10: [mem 0xfe7a0000-0xfe7a7fff 64bit]
pci 0000:15:00.0: PME# supported from D3hot D3cold
pci 0000:15:00.1: [1022:43b7] type 00 class 0x010601
pci 0000:15:00.1: reg 0x24: [mem 0xfe780000-0xfe79ffff]
pci 0000:15:00.1: reg 0x30: [mem 0xfe700000-0xfe77ffff pref]
pci 0000:15:00.1: PME# supported from D3hot D3cold
pci 0000:15:00.2: [1022:43b2] type 01 class 0x060400
pci 0000:15:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.2: PCI bridge to [bus 15-25]
pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
pci 0000:00:01.2: bridge window [mem 0xfe500000-0xfe7fffff]
pci 0000:1d:00.0: [1022:43b4] type 01 class 0x060400
pci 0000:1d:00.0: PME# supported from D3hot D3cold
pci 0000:1d:01.0: [1022:43b4] type 01 class 0x060400
pci 0000:1d:01.0: PME# supported from D3hot D3cold
pci 0000:1d:04.0: [1022:43b4] type 01 class 0x060400
pci 0000:1d:04.0: PME# supported from D3hot D3cold
pci 0000:1d:05.0: [1022:43b4] type 01 class 0x060400
pci 0000:1d:05.0: PME# supported from D3hot D3cold
pci 0000:1d:06.0: [1022:43b4] type 01 class 0x060400
pci 0000:1d:06.0: PME# supported from D3hot D3cold
pci 0000:1d:07.0: [1022:43b4] type 01 class 0x060400
pci 0000:1d:07.0: PME# supported from D3hot D3cold
pci 0000:15:00.2: PCI bridge to [bus 1d-25]
pci 0000:15:00.2: bridge window [io 0xf000-0xffff]
pci 0000:15:00.2: bridge window [mem 0xfe500000-0xfe6fffff]
pci 0000:1d:00.0: PCI bridge to [bus 1e]
pci 0000:1d:01.0: PCI bridge to [bus 1f]
pci 0000:1d:04.0: PCI bridge to [bus 22]
pci 0000:1d:05.0: PCI bridge to [bus 23]
pci 0000:24:00.0: [8086:24fb] type 00 class 0x028000
pci 0000:24:00.0: reg 0x10: [mem 0xfe600000-0xfe601fff 64bit]
pci 0000:24:00.0: PME# supported from D0 D3hot D3cold
pci 0000:1d:06.0: PCI bridge to [bus 24]
pci 0000:1d:06.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:25:00.0: [8086:1539] type 00 class 0x020000
pci 0000:25:00.0: reg 0x10: [mem 0xfe500000-0xfe51ffff]
pci 0000:25:00.0: reg 0x18: [io 0xf000-0xf01f]
pci 0000:25:00.0: reg 0x1c: [mem 0xfe520000-0xfe523fff]
pci 0000:25:00.0: PME# supported from D0 D3hot D3cold
pci 0000:1d:07.0: PCI bridge to [bus 25]
pci 0000:1d:07.0: bridge window [io 0xf000-0xffff]
pci 0000:1d:07.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:2e:00.0: [15b7:5001] type 00 class 0x010802
pci 0000:2e:00.0: reg 0x10: [mem 0xfe900000-0xfe903fff 64bit]
pci 0000:00:01.6: PCI bridge to [bus 2e]
pci 0000:00:01.6: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:38:00.0: [1002:15dd] type 00 class 0x030000
pci 0000:38:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:38:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:38:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:38:00.0: reg 0x24: [mem 0xfe400000-0xfe47ffff]
pci 0000:38:00.0: enabling Extended Tags
pci 0000:38:00.0: BAR 0: assigned to efifb
pci 0000:38:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:38:00.1: [1002:15de] type 00 class 0x040300
pci 0000:38:00.1: reg 0x10: [mem 0xfe488000-0xfe48bfff]
pci 0000:38:00.1: enabling Extended Tags
pci 0000:38:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:38:00.2: [1022:15df] type 00 class 0x108000
pci 0000:38:00.2: reg 0x18: [mem 0xfe300000-0xfe3fffff]
pci 0000:38:00.2: reg 0x24: [mem 0xfe48c000-0xfe48dfff]
pci 0000:38:00.2: enabling Extended Tags
pci 0000:38:00.3: [1022:15e0] type 00 class 0x0c0330
pci 0000:38:00.3: reg 0x10: [mem 0xfe200000-0xfe2fffff 64bit]
pci 0000:38:00.3: enabling Extended Tags
pci 0000:38:00.3: PME# supported from D0 D3hot D3cold
pci 0000:38:00.4: [1022:15e1] type 00 class 0x0c0330
pci 0000:38:00.4: reg 0x10: [mem 0xfe100000-0xfe1fffff 64bit]
pci 0000:38:00.4: enabling Extended Tags
pci 0000:38:00.4: PME# supported from D0 D3hot D3cold
pci 0000:38:00.6: [1022:15e3] type 00 class 0x040300
pci 0000:38:00.6: reg 0x10: [mem 0xfe480000-0xfe487fff]
pci 0000:38:00.6: enabling Extended Tags
pci 0000:38:00.6: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 38]
pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
pci 0000:00:08.1: bridge window [mem 0xfe100000-0xfe4fffff]
pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:39:00.0: [1022:7901] type 00 class 0x010601
pci 0000:39:00.0: reg 0x24: [mem 0xfe800000-0xfe8007ff]
pci 0000:39:00.0: enabling Extended Tags
pci 0000:39:00.0: PME# supported from D3hot D3cold
pci 0000:00:08.2: PCI bridge to [bus 39]
pci 0000:00:08.2: bridge window [mem 0xfe800000-0xfe8fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:38:00.0: vgaarb: setting as boot VGA device
pci 0000:38:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:38:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
e820: reserve RAM buffer [mem 0x9a9ab000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9bf76000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff]
e820: reserve RAM buffer [mem 0x81f340000-0x81fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0280-0x028f] has been reserved
system 00:03: [io 0x0290-0x029f] has been reserved
system 00:03: [io 0x02a0-0x02af] has been reserved
system 00:03: [io 0x02b0-0x02bf] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x040b] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c51] has been reserved
system 00:04: [io 0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cd1] has been reserved
system 00:04: [io 0x0cd2-0x0cd3] has been reserved
system 00:04: [io 0x0cd4-0x0cd5] has been reserved
system 00:04: [io 0x0cd6-0x0cd7] has been reserved
system 00:04: [io 0x0cd8-0x0cdf] has been reserved
system 00:04: [io 0x0800-0x089f] has been reserved
system 00:04: [io 0x0b00-0x0b0f] has been reserved
system 00:04: [io 0x0b20-0x0b3f] has been reserved
system 00:04: [io 0x0900-0x090f] has been reserved
system 00:04: [io 0x0910-0x091f] has been reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.6: bridge window [io 0x1000-0x0fff] to [bus 2e] add_size 1000
pci 0000:00:01.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 2e] add_size 200000 add_align 100000
pci 0000:00:01.6: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:01.6: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:1d:00.0: PCI bridge to [bus 1e]
pci 0000:1d:01.0: PCI bridge to [bus 1f]
pci 0000:1d:04.0: PCI bridge to [bus 22]
pci 0000:1d:05.0: PCI bridge to [bus 23]
pci 0000:1d:06.0: PCI bridge to [bus 24]
pci 0000:1d:06.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:1d:07.0: PCI bridge to [bus 25]
pci 0000:1d:07.0: bridge window [io 0xf000-0xffff]
pci 0000:1d:07.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:15:00.2: PCI bridge to [bus 1d-25]
pci 0000:15:00.2: bridge window [io 0xf000-0xffff]
pci 0000:15:00.2: bridge window [mem 0xfe500000-0xfe6fffff]
pci 0000:00:01.2: PCI bridge to [bus 15-25]
pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
pci 0000:00:01.2: bridge window [mem 0xfe500000-0xfe7fffff]
pci 0000:00:01.6: PCI bridge to [bus 2e]
pci 0000:00:01.6: bridge window [io 0x1000-0x1fff]
pci 0000:00:01.6: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:01.6: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:08.1: PCI bridge to [bus 38]
pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
pci 0000:00:08.1: bridge window [mem 0xfe100000-0xfe4fffff]
pci 0000:00:08.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:08.2: PCI bridge to [bus 39]
pci 0000:00:08.2: bridge window [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:15: resource 0 [io 0xf000-0xffff]
pci_bus 0000:15: resource 1 [mem 0xfe500000-0xfe7fffff]
pci_bus 0000:1d: resource 0 [io 0xf000-0xffff]
pci_bus 0000:1d: resource 1 [mem 0xfe500000-0xfe6fffff]
pci_bus 0000:24: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:25: resource 0 [io 0xf000-0xffff]
pci_bus 0000:25: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:2e: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:2e: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:2e: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
pci_bus 0000:38: resource 0 [io 0xe000-0xefff]
pci_bus 0000:38: resource 1 [mem 0xfe100000-0xfe4fffff]
pci_bus 0000:38: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:39: resource 1 [mem 0xfe800000-0xfe8fffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:38:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 52200K
AMD-Vi: Unable to write to IOMMU perf counter.
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
iommu: Adding device 0000:00:01.0 to group 0
iommu: Adding device 0000:00:01.2 to group 1
iommu: Adding device 0000:00:01.6 to group 2
iommu: Adding device 0000:00:08.0 to group 3
iommu: Adding device 0000:00:08.1 to group 4
iommu: Adding device 0000:00:08.2 to group 3
iommu: Adding device 0000:00:14.0 to group 5
iommu: Adding device 0000:00:14.3 to group 5
iommu: Adding device 0000:00:18.0 to group 6
iommu: Adding device 0000:00:18.1 to group 6
iommu: Adding device 0000:00:18.2 to group 6
iommu: Adding device 0000:00:18.3 to group 6
iommu: Adding device 0000:00:18.4 to group 6
iommu: Adding device 0000:00:18.5 to group 6
iommu: Adding device 0000:00:18.6 to group 6
iommu: Adding device 0000:00:18.7 to group 6
iommu: Adding device 0000:15:00.0 to group 7
iommu: Adding device 0000:15:00.1 to group 7
iommu: Adding device 0000:15:00.2 to group 7
iommu: Adding device 0000:1d:00.0 to group 7
iommu: Adding device 0000:1d:01.0 to group 7
iommu: Adding device 0000:1d:04.0 to group 7
iommu: Adding device 0000:1d:05.0 to group 7
iommu: Adding device 0000:1d:06.0 to group 7
iommu: Adding device 0000:1d:07.0 to group 7
iommu: Adding device 0000:24:00.0 to group 7
iommu: Adding device 0000:25:00.0 to group 7
iommu: Adding device 0000:2e:00.0 to group 8
iommu: Adding device 0000:38:00.0 to group 9
iommu: Using direct mapping for device 0000:38:00.0
iommu: Adding device 0000:38:00.1 to group 10
iommu: Adding device 0000:38:00.2 to group 10
iommu: Adding device 0000:38:00.3 to group 10
iommu: Adding device 0000:38:00.4 to group 10
iommu: Adding device 0000:38:00.6 to group 10
iommu: Adding device 0000:39:00.0 to group 3
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features (0x4f77ef22294ada):
PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.2: AER enabled with IRQ 26
pcieport 0000:00:01.6: AER enabled with IRQ 27
pcieport 0000:00:01.2: Signaling PME with IRQ 26
pcieport 0000:00:01.6: Signaling PME with IRQ 27
pcieport 0000:00:08.1: Signaling PME with IRQ 28
pcieport 0000:00:08.2: Signaling PME with IRQ 29
pciehp 0000:00:01.6:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Linux agpgart interface v0.103
loop: module loaded
nvme nvme0: pci function 0000:2e:00.0
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:15:00.0: xHCI Host Controller
xhci_hcd 0000:15:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:15:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.15.0-10-generic xhci-hcd
usb usb1: SerialNumber: 0000:15:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
xhci_hcd 0000:15:00.0: xHCI Host Controller
xhci_hcd 0000:15:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:15:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.15.0-10-generic xhci-hcd
usb usb2: SerialNumber: 0000:15:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb: port power management may be unreliable
xhci_hcd 0000:38:00.3: xHCI Host Controller
xhci_hcd 0000:38:00.3: new USB bus registered, assigned bus number 3
xhci_hcd 0000:38:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x00000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.15.0-10-generic xhci-hcd
usb usb3: SerialNumber: 0000:38:00.3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:38:00.3: xHCI Host Controller
xhci_hcd 0000:38:00.3: new USB bus registered, assigned bus number 4
xhci_hcd 0000:38:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.15.0-10-generic xhci-hcd
usb usb4: SerialNumber: 0000:38:00.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:38:00.4: xHCI Host Controller
xhci_hcd 0000:38:00.4: new USB bus registered, assigned bus number 5
xhci_hcd 0000:38:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x00000410
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.15.0-10-generic xhci-hcd
usb usb5: SerialNumber: 0000:38:00.4
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
xhci_hcd 0000:38:00.4: xHCI Host Controller
xhci_hcd 0000:38:00.4: new USB bus registered, assigned bus number 6
xhci_hcd 0000:38:00.4: Host supports USB 3.1 Enhanced SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.15.0-10-generic xhci-hcd
usb usb6: SerialNumber: 0000:38:00.4
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x08101007
microcode: CPU1: patch_level=0x08101007
microcode: CPU2: patch_level=0x08101007
microcode: CPU3: patch_level=0x08101007
microcode: CPU4: patch_level=0x08101007
microcode: CPU5: patch_level=0x08101007
microcode: CPU6: patch_level=0x08101007
microcode: CPU7: patch_level=0x08101007
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (883091314, 0)->(960539889, -77448575)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: cfb5ef05dbf6c6d52c0a9007e2f0645cc1173f6d'
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI db list
Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary sys keyring
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI dbx list
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 6:628:732
rtc_cmos 00:02: setting system clock to 2018-02-24 11:43:34 UTC (1519472614)
acpi_cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 2404K
Write protecting the kernel read-only data: 20480k
Freeing unused kernel memory: 2008K
Freeing unused kernel memory: 1924K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
ahci 0000:15:00.1: version 3.0
ahci 0000:15:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:15:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
ahci 0000:15:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
scsi host3: ahci
PTP clock support registered
dca service started, version 1.12.1
scsi host4: ahci
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780100 irq 62
ata2: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780180 irq 62
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780300 irq 62
ata6: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780380 irq 62
ata7: DUMMY
ata8: DUMMY
ahci 0000:39:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:39:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
scsi host8: ahci
ata9: SATA max UDMA/133 abar m2048@0xfe800000 port 0xfe800100 irq 64
nvme0n1: p1 p2
[drm] amdgpu kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
Found CRAT image with size=2064
Parsing CRAT table with 1 nodes
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU CPU: cores=8 id_base=0
CU GPU: simds=44 id_base=0
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=6
Found cache entry in CRAT table with processor_id=6
Found cache entry in CRAT table with processor_id=6
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Creating topology SYSFS entries
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
fb: switching to amdgpudrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1002:0x15DD 0xC6).
[drm] register mmio base: 0xFE400000
[drm] register mmio size: 524288
[drm] probing gen 2 caps for device 1022:15db = 700d03/e
[drm] probing mlw for device 1022:15db = 700d03
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
[drm] BIOS signature incorrect 1e 0
ATOM BIOS: 113-RAVEN-103
[drm] GPU post is not needed
[drm] vm size is 262144 GB, block size is 9-bit,fragment size is 9-bit
amdgpu 0000:38:00.0: VRAM: 1024M 0x000000F400000000 - 0x000000F43FFFFFFF (1024M used)
amdgpu 0000:38:00.0: GTT: 1024M 0x000000F440000000 - 0x000000F47FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits UNKNOWN
[TTM] Zone kernel: Available graphics memory: 15949446 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 1024M of VRAM memory ready
[drm] amdgpu: 3072M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F400800000).
amdgpu 0000:38:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
amdgpu: [powerplay] amdgpu: powerplay sw initialized
amdgpu 0000:38:00.0: fence driver on ring 0 use gpu addr 0x000000f440400040, cpu addr 0x00000000284b09d9
amdgpu 0000:38:00.0: fence driver on ring 1 use gpu addr 0x000000f4404000c0, cpu addr 0x00000000f5350dfd
amdgpu 0000:38:00.0: fence driver on ring 2 use gpu addr 0x000000f440400140, cpu addr 0x00000000b73c7043
amdgpu 0000:38:00.0: fence driver on ring 3 use gpu addr 0x000000f4404001c0, cpu addr 0x00000000caf6789b
amdgpu 0000:38:00.0: fence driver on ring 4 use gpu addr 0x000000f440400240, cpu addr 0x000000006c324093
amdgpu 0000:38:00.0: fence driver on ring 5 use gpu addr 0x000000f4404002c0, cpu addr 0x00000000620e1400
amdgpu 0000:38:00.0: fence driver on ring 6 use gpu addr 0x000000f440400340, cpu addr 0x0000000084a99c45
amdgpu 0000:38:00.0: fence driver on ring 7 use gpu addr 0x000000f4404003c0, cpu addr 0x000000002c3bc94b
amdgpu 0000:38:00.0: fence driver on ring 8 use gpu addr 0x000000f440400440, cpu addr 0x00000000c8653204
amdgpu 0000:38:00.0: fence driver on ring 9 use gpu addr 0x000000f4404004e0, cpu addr 0x000000007b823261
[drm] use_doorbell being set to: [true]
amdgpu 0000:38:00.0: fence driver on ring 10 use gpu addr 0x000000f440400560, cpu addr 0x00000000d0c9cc39
[drm] Found VCN firmware Version: 1.73 Family ID: 18
amdgpu 0000:38:00.0: fence driver on ring 11 use gpu addr 0x000000f4404005e0, cpu addr 0x000000009c1a1afd
amdgpu 0000:38:00.0: fence driver on ring 12 use gpu addr 0x000000f440400660, cpu addr 0x00000000eaed753c
amdgpu 0000:38:00.0: fence driver on ring 13 use gpu addr 0x000000f4404006e0, cpu addr 0x00000000fba472b8
usb 1-6: new full-speed USB device number 2 using xhci_hcd
pps pps0: new PPS source ptp0
igb 0000:25:00.0: added PHC on eth0
igb 0000:25:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:25:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 70:85:c2:72:05:e3
igb 0000:25:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:25:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
igb 0000:25:00.0 enp37s0: renamed from eth0
[drm] DC: create_links: connectors_num: physical:4, virtual:0
[drm] Display Core initialized!
[drm] PL2210HD: [Block 0]
[drm] PL2210HD: [Block 1]
[drm] dc_link_detect: manufacturer_id = CD26, product_id = 5612, serial_number = 2CE, manufacture_week = 6, manufacture_year = 20, display_name = PL2210HD, speaker_flag = 1, audio_mode_count = 1
[drm] dc_link_detect: mode number = 0, format_code = 1, channel_count = 1, sample_rate = 7, sample_size = 1
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 9 succeeded in 4 usecs
[drm] ring test on 1 succeeded in 3 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 4 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 3 usecs
[drm] ring test on 6 succeeded in 2 usecs
[drm] ring test on 7 succeeded in 2 usecs
[drm] ring test on 8 succeeded in 2 usecs
[drm] ring test on 10 succeeded in 6 usecs
[drm] ring test on 11 succeeded in 2 usecs
[drm] ring test on 12 succeeded in 45 usecs
[drm] ring test on 13 succeeded in 8 usecs
[drm] VCN decode and encode initialized successfully.
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[drm] ib test on ring 13 succeeded
[drm] fb mappable at 0xE1000000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
amdgpu 0000:38:00.0: fb0: amdgpudrmfb frame buffer device
ata1: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
amdgpu 0000:38:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0
amdgpu 0000:38:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0
amdgpu 0000:38:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0
amdgpu 0000:38:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0
amdgpu 0000:38:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0
amdgpu 0000:38:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0
amdgpu 0000:38:00.0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0
amdgpu 0000:38:00.0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0
amdgpu 0000:38:00.0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0
amdgpu 0000:38:00.0: ring 9(kiq_2.1.7) uses VM inv eng 13 on hub 0
amdgpu 0000:38:00.0: ring 10(sdma0) uses VM inv eng 4 on hub 1
amdgpu 0000:38:00.0: ring 11(vcn_dec) uses VM inv eng 5 on hub 1
amdgpu 0000:38:00.0: ring 12(vcn_enc0) uses VM inv eng 6 on hub 1
amdgpu 0000:38:00.0: ring 13(vcn_enc1) uses VM inv eng 7 on hub 1
amdgpu 0000:38:00.0: kfd not supported on this ASIC
[drm] Initialized amdgpu 3.23.0 20150101 for 0000:38:00.0 on minor 0
usb 1-6: New USB device found, idVendor=8087, idProduct=0aa7
usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ata2: SATA link down (SStatus 0 SControl 300)
usb 1-10: new full-speed USB device number 3 using xhci_hcd
tsc: Refined TSC clocksource calibration: 3596.373 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33d6f0b5807, max_idle_ns: 440795236559 ns
ata5: SATA link down (SStatus 0 SControl 300)
usb 1-10: New USB device found, idVendor=046d, idProduct=c534
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-10: Product: USB Receiver
usb 1-10: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-10/1-10:1.0/0003:046D:C534.0001/input/input2
hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:15:00.0-10/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-10/1-10:1.1/0003:046D:C534.0002/input/input3
hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:15:00.0-10/input1
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
ata6.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA SAMSUNG SSD 830 3B1Q PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg0 type 0
sd 5:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 5:0:0:0: [sda] Write Protect is off
sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 5:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 235 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
clocksource: Switched to clocksource tsc
systemd-journald[322]: Received request to flush runtime journal from PID 1
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
[drm:generic_reg_wait [amdgpu]] *ERROR* REG_WAIT timeout 1us * 100 tries - tgn10_lock line:566
WARNING: CPU: 4 PID: 370 at /build/linux-LuqUgo/linux-4.15.0/drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c:190 generic_reg_wait+0xe8/0x120 [amdgpu]
Modules linked in: sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid amdkfd amd_iommu_v2 amdgpu chash ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops igb i2c_piix4 drm dca i2c_algo_bit ptp pps_core ahci libahci wmi video
CPU: 4 PID: 370 Comm: plymouthd Not tainted 4.15.0-10-generic #11-Ubuntu
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./AB350 Gaming-ITX/ac, BIOS L4.43 02/12/2018
RIP: 0010:generic_reg_wait+0xe8/0x120 [amdgpu]
RSP: 0018:ffffb52143e5f930 EFLAGS: 00010297
RAX: 0000000000000001 RBX: 0000000000000065 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff93439ed16458 RDI: ffff93439ed16458
RBP: ffffb52143e5f970 R08: 0000000000000000 R09: 00000000000003fd
R10: 0000000000000002 R11: ffffffff9195280d R12: 0000000000000001
R13: ffff93437c338a00 R14: 0000000000000100 R15: 0000000000000001
FS: 00007fccaf271740(0000) GS:ffff93439ed00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055b27f2fdfe0 CR3: 00000007f2b94000 CR4: 00000000003406e0
Call Trace:
tgn10_lock+0xa2/0xb0 [amdgpu]
program_all_pipe_in_tree+0x804/0x8b0 [amdgpu]
? amdgpu_cgs_write_register+0x14/0x20 [amdgpu]
? generic_reg_update_ex+0xe6/0x150 [amdgpu]
? amdgpu_cgs_read_register+0x14/0x20 [amdgpu]
dcn10_apply_ctx_for_surface+0x498/0x4f0 [amdgpu]
dc_commit_state+0x2aa/0x500 [amdgpu]
amdgpu_dm_atomic_commit_tail+0x2cd/0xa50 [amdgpu]
? amdgpu_bo_pin_restricted+0x1b5/0x2a0 [amdgpu]
? dm_plane_helper_prepare_fb+0x181/0x240 [amdgpu]
commit_tail+0x42/0x70 [drm_kms_helper]
drm_atomic_helper_commit+0x10c/0x120 [drm_kms_helper]
amdgpu_dm_atomic_commit+0x87/0xa0 [amdgpu]
drm_atomic_commit+0x51/0x60 [drm]
restore_fbdev_mode_atomic+0x178/0x1e0 [drm_kms_helper]
restore_fbdev_mode+0x32/0x140 [drm_kms_helper]
? _cond_resched+0x19/0x40
drm_fb_helper_restore_fbdev_mode_unlocked.part.32+0x28/0x80 [drm_kms_helper]
drm_fb_helper_restore_fbdev_mode_unlocked+0x26/0x30 [drm_kms_helper]
amdgpu_fbdev_restore_mode+0x1f/0x50 [amdgpu]
amdgpu_driver_lastclose_kms+0x12/0x20 [amdgpu]
drm_lastclose+0x3c/0xf0 [drm]
drm_release+0x2cf/0x390 [drm]
__fput+0xea/0x220
____fput+0xe/0x10
task_work_run+0x9d/0xc0
exit_to_usermode_loop+0xc0/0xd0
do_syscall_64+0x118/0x130
entry_SYSCALL_64_after_hwframe+0x21/0x86
RIP: 0033:0x7fccae965844
RSP: 002b:00007ffdd7c545b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000559b4f317300 RCX: 00007fccae965844
RDX: 0000559b4f317300 RSI: 0000000000000000 RDI: 0000000000000009
RBP: 0000000000000009 R08: 00000000ffffffff R09: 0000559b4f30b500
R10: ffffffffffffffb0 R11: 0000000000000246 R12: 000000000000e200
R13: 0000000000000000 R14: 00007fccaec53b40 R15: 00007fccaec53a90
Code: 31 f6 44 8b 45 10 44 89 e1 48 c7 c7 a3 66 6f c0 89 45 d4 52 48 c7 c2 10 ed 6e c0 e8 f3 be d2 ff 41 83 7d 20 01 58 8b 45 d4 74 02 ff 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 c7 45 c4 23
---[ end trace 4cd844a331dc53e6 ]---
[drm] DC: Cursor address is 0!
[drm] DC: Cursor address is 0!
[drm] {1920x1080, 2200x1125@148500Khz}
[drm] DC: Cursor address is 0!
[drm] DC: Cursor address is 0!
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
kvm: disabled by bios
MCE: In-kernel MCE decoding enabled.
cfg80211: Loading compiled-in X.509 certificates for regulatory database
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:24:00.0: enabling device (0000 -> 0002)
usbcore: registered new interface driver btusb
snd_hda_intel 0000:38:00.1: Handle vga_switcheroo audio client
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input4
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input5
input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input6
input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input7
input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input8
input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:08.1/0000:38:00.1/sound/card0/input9
Bluetooth: hci0: read Intel version: 370810225019140f1d
Bluetooth: hci0: Intel device is already patched. patch num: 1d
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
iwlwifi 0000:24:00.0: loaded firmware version 29.610311.0 op_mode iwlmvm
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input10
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input11
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input12
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input13
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input14
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input15
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:38:00.6/sound/card1/input16
random: crng init done
iwlwifi 0000:24:00.0: Detected Intel(R) Dual Band Wireless AC 3168, REV=0x220
iwlwifi 0000:24:00.0: base HW address: b8:08:cf:d4:f9:22
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal thermal_zone0: failed to read out thermal zone (-61)
iwlwifi 0000:24:00.0 wlp36s0: renamed from wlan0
[drm] DC: Cursor address is 0!
[drm] DC: Cursor address is 0!
[drm] DC: Cursor address is 0!
[drm] DC: Cursor address is 0!
audit: type=1400 audit(1519472617.743:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=673 comm="apparmor_parser"
audit: type=1400 audit(1519472617.743:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=672 comm="apparmor_parser"
audit: type=1400 audit(1519472617.743:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=671 comm="apparmor_parser"
audit: type=1400 audit(1519472617.743:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=671 comm="apparmor_parser"
audit: type=1400 audit(1519472617.743:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=671 comm="apparmor_parser"
audit: type=1400 audit(1519472617.743:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4017/usr/lib/snapd/snap-confine" pid=667 comm="apparmor_parser"
audit: type=1400 audit(1519472617.743:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4017/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=667 comm="apparmor_parser"
audit: type=1400 audit(1519472617.743:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4017/usr/lib/snapd/snap-confine//snap_update_ns" pid=667 comm="apparmor_parser"
audit: type=1400 audit(1519472617.743:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=675 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): enp37s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp37s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp36s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp36s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp36s0: link is not ready
igb 0000:25:00.0 enp37s0: igb: enp37s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp37s0: link becomes ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler disabled
usb 1-10: USB disconnect, device number 3
usb 1-10: new full-speed USB device number 4 using xhci_hcd
usb 1-10: New USB device found, idVendor=046d, idProduct=c534
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-10: Product: USB Receiver
usb 1-10: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-10/1-10:1.0/0003:046D:C534.0003/input/input17
hid-generic 0003:046D:C534.0003: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:15:00.0-10/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-10/1-10:1.1/0003:046D:C534.0004/input/input18
hid-generic 0003:046D:C534.0004: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:15:00.0-10/input1
[drm:generic_reg_wait [amdgpu]] *ERROR* REG_WAIT timeout 1us * 100 tries - tgn10_lock line:566
WARNING: CPU: 2 PID: 1282 at /build/linux-LuqUgo/linux-4.15.0/drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c:190 generic_reg_wait+0xe8/0x120 [amdgpu]
Modules linked in: rfcomm cmac bnep nls_iso8859_1 arc4 iwlmvm mac80211 snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi snd_seq_midi snd_hda_intel joydev input_leds snd_seq_midi_event snd_hda_codec snd_hda_core btusb snd_hwdep btrtl iwlwifi snd_rawmidi btbcm snd_pcm btintel bluetooth cfg80211 snd_seq edac_mce_amd snd_seq_device snd_timer kvm snd irqbypass crct10dif_pclmul crc32_pclmul ecdh_generic soundcore ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd shpchp wmi_bmof mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid amdkfd amd_iommu_v2 amdgpu chash ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops igb i2c_piix4 drm dca i2c_algo_bit ptp pps_core ahci libahci wmi video
CPU: 2 PID: 1282 Comm: Xorg Tainted: G W 4.15.0-10-generic #11-Ubuntu
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./AB350 Gaming-ITX/ac, BIOS L4.43 02/12/2018
RIP: 0010:generic_reg_wait+0xe8/0x120 [amdgpu]
RSP: 0018:ffffb5214a0177d8 EFLAGS: 00010297
RAX: 0000000000000001 RBX: 0000000000000065 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff93439ec96458 RDI: ffff93439ec96458
RBP: ffffb5214a017818 R08: 0000000000000000 R09: 0000000000000491
R10: 0000000000000002 R11: ffffffff9195280d R12: 0000000000000001
R13: ffff93437c338a00 R14: 0000000000000100 R15: 0000000000000001
FS: 00007fd973e31500(0000) GS:ffff93439ec80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000564251c2e820 CR3: 00000007f5636000 CR4: 00000000003406e0
Call Trace:
tgn10_lock+0xa2/0xb0 [amdgpu]
program_all_pipe_in_tree+0x804/0x8b0 [amdgpu]
? free_one_page+0x76/0x400
? amdgpu_cgs_read_register+0x14/0x20 [amdgpu]
dcn10_apply_ctx_for_surface+0x498/0x4f0 [amdgpu]
dc_commit_state+0x2aa/0x500 [amdgpu]
amdgpu_dm_atomic_commit_tail+0x2cd/0xa50 [amdgpu]
? amdgpu_bo_pin_restricted+0x1b5/0x2a0 [amdgpu]
? _cond_resched+0x19/0x40
? wait_for_completion_interruptible+0x35/0x180
commit_tail+0x42/0x70 [drm_kms_helper]
drm_atomic_helper_commit+0x10c/0x120 [drm_kms_helper]
amdgpu_dm_atomic_commit+0x87/0xa0 [amdgpu]
drm_atomic_commit+0x51/0x60 [drm]
drm_atomic_helper_set_config+0x7c/0x90 [drm_kms_helper]
__drm_mode_set_config_internal+0x6b/0x120 [drm]
drm_mode_setcrtc+0x47f/0x660 [drm]
? drm_mode_getcrtc+0x190/0x190 [drm]
drm_ioctl_kernel+0x5f/0xb0 [drm]
drm_ioctl+0x31b/0x3d0 [drm]
? drm_mode_getcrtc+0x190/0x190 [drm]
amdgpu_drm_ioctl+0x4f/0x90 [amdgpu]
do_vfs_ioctl+0xa8/0x630
? handle_mm_fault+0xb1/0x200
? __do_page_fault+0x277/0x4d0
? vfs_read+0x115/0x130
SyS_ioctl+0x79/0x90
do_syscall_64+0x76/0x130
entry_SYSCALL_64_after_hwframe+0x21/0x86
RIP: 0033:0x7fd971281ef7
RSP: 002b:00007fff2a7c5138 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fff2a7c5170 RCX: 00007fd971281ef7
RDX: 00007fff2a7c5170 RSI: 00000000c06864a2 RDI: 000000000000000c
RBP: 00007fff2a7c5170 R08: 0000000000000000 R09: 0000564251f923e0
R10: 00007fff2a7c5230 R11: 0000000000000246 R12: 00000000c06864a2
R13: 000000000000000c R14: 0000000000000000 R15: 0000564251f923e0
Code: 31 f6 44 8b 45 10 44 89 e1 48 c7 c7 a3 66 6f c0 89 45 d4 52 48 c7 c2 10 ed 6e c0 e8 f3 be d2 ff 41 83 7d 20 01 58 8b 45 d4 74 02 ff 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 c7 45 c4 23
---[ end trace 4cd844a331dc53e7 ]---
[drm] DC: Cursor address is 0!
[drm] DC: Cursor address is 0!
[drm] {1920x1080, 2200x1125@148500Khz}
[drm] PL2210HD: [Block 0]
[drm] PL2210HD: [Block 1]
[drm] dc_link_detect: manufacturer_id = CD26, product_id = 5612, serial_number = 2CE, manufacture_week = 6, manufacture_year = 20, display_name = PL2210HD, speaker_flag = 1, audio_mode_count = 1
[drm] dc_link_detect: mode number = 0, format_code = 1, channel_count = 1, sample_rate = 7, sample_size = 1
[drm] DC: Cursor address is 0!
[drm] DC: Cursor address is 0!
[drm] {1920x1080, 2200x1125@148500Khz}
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
amdgpu: [powerplay] pp_dpm_get_temperature was not implemented.
usb 1-10: USB disconnect, device number 4
usb 1-10: new full-speed USB device number 5 using xhci_hcd
usb 1-10: New USB device found, idVendor=046d, idProduct=c534
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-10: Product: USB Receiver
usb 1-10: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-10/1-10:1.0/0003:046D:C534.0005/input/input19
hid-generic 0003:046D:C534.0005: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:15:00.0-10/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-10/1-10:1.1/0003:046D:C534.0006/input/input20
hid-generic 0003:046D:C534.0006: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:15:00.0-10/input1
amdgpu: [powerplay] pp_dpm_get_sclk_od was not implemented.